The SID−X1N is a DGKat™ twisted pair transmitter and step−in commander for computer graphics video, HDMI, DVI, DisplayPort and unbalanced stereo audio signals. The unit includes a “Step−In” button that allows the local source to be routed as the active source on the main display through the main switcher.
Max. Data Rate — 4.95Gbps (1.65Gbps per graphics channel).
Compatible Switcher — VP–81SIDN.
HDCP Compliant. — Works with sources that support HDCP repeater mode.
HDMI Support — x.v.Color™ and 3D.
EDID Pass–through — Pass–through algorithm ensures Plug and Play operation for HDMI source and display systems.
Data Equalization and Reclocking.
Input Signal Detection — Based on video clock presence.
Automatic Input Selection — Based on manual selection or last connected input.
Automatic Analog Audio Detection and Embedding.
Local Balanced Audio De–embedding.
Support for Digital Audio Formats.
DGKat™ Signal Integration — Kramer’s unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables.
Cable — Requires STP (shielded twisted pair) cable. For optimum range and performance, use shielded Kramer CAT 6 or CAT 7 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non–Kramer CAT 6 and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
Power Connect™ System — A single connection to the transmitter powers both units when the devices are within 150ft (50m) of each other.
Local Step–In Switching — Button & contact closure.
Power Supply — Requires independent power supply.
1 HDMI on an HDMI connector, 1 DP on a DisplayPort connector, 1 DVI–D on a DVI–I connector
1 VGA on a 15–pin HD (F) connector, 1 unbalanced stereo audio on a 3.5mm mini jack
1 twisted pair on an RJ–45, 1 unbalanced stereo audio in a 3.5mm mini jack
1 RS–232 3–pin terminal block for programming
Front panel buttons, remote step–in switch, remote input selection switches
Analog Audio Input
Maximum level — 3Vpp
Remote LED Impedence
5V, 300Ω approx
HDMI with x.v.Color™ and 3D
HDCP: works with sources that support HDCP repeater mode
Maxmimum Data Rate
4.95Gbps (1.65Gb per graphics channel)
Maximum Step in Distance
50m (164ft) up to 1080p @60Hz @24bpp
12V DC, 1.1A
0° to +40°C (32° to 104°F)
–40° to +70°C (–40° to 158°F)
10% to 90%, RHL non–condensing
18.75cm x 11.50cm x 2.54cm (7.38" x 4.53" x 1.00" ) W, D, H
0.5kg (1.0lbs) approx.
34.50cm x 16.50cm x 5.20cm (13.58" x 6.50" x 2.05" ) W, D, H
1.4kg (3.1lbs) approx.
Nam libero tempore, cum soluta nobis est eligendi optio cumque nihil impedit quo minus id quod maxime placeat facere possimus, omnis voluptas assumenda est.